Metrological characteristics

Name of the standard 

The limit (range) of measurements 

State primary standard of the unit of mass liquid flow rate GET 63-2011  

The range of values ??of the average mass liquid flow rate, in which the unit is reproduced, is 2,5-500 t / h

State primary special standard of the unit of volumetric water content of petroleum and petroleum products GET 87-2011 

The range of values ??of the moisture content of the oil-water mixture, in which the volumetric water content unit is reproduced is: 0.01 / 99.9% of the volumetric fraction of water

State primary special standard of the unit of volumetric and mass flow rate GET 119-2010

Range of flow rate, m3 / h (t / h) 0.01 / 50.0 (0.01 / 50.0)

State primary special standard of the unit of volumetric and mass flow rate of petroleum products GET120-2010

Range of flow rate, m3 / h (t / h) 0.01 50.0 (0.01 50.0)

State primary standard of units of volumetric and mass flow rate of gas GET 118-2013

Reproduction range of volumetric (mass) flowrates 310-3 16000 m3/h (3,610-3 19200 kg/h)

State primary special standard of the unit of mass flow rate of gas-liquid mixtures GET 195-2011

Mass flow rate of gas-liquid mixture QGZHSM - 2-110 t / h
Mass flow rate of liquid QZH - 2-110 t / h
Volumetric flow rate of gas, reduced to standard conditions, QGv - 0.1-250 m3 / h

State standard of in-stream liquid density unit VET 18 10 2014

Range of liquid density values within which a unit is reproduced and transferred, kg/m3 from 600 to 1200
Absolute error limits of the standard (expanded uncertainty), kg/m3 0.03
The following values of liquid parameters are maintained during reproduction of a density unit:
temperature,      from plus 5 to plus 70
maximum gage pressure, MPa   10